180 lines
7.0 KiB
C
180 lines
7.0 KiB
C
|
|
|
|
// Customised User_Setup files are stored in the "User_Setups" folder.
|
|
|
|
#ifndef USER_SETUP_LOADED // Lets PlatformIO users define settings in
|
|
// platformio.ini, see notes in "Tools" folder.
|
|
|
|
// Only ONE line below should be uncommented. Add extra lines and files as needed.
|
|
|
|
// #include <User_Setup.h> // Default setup is root library folder
|
|
|
|
|
|
// Setup file configured for my ST7789 240x240 - used in 114 LPS and 115 SPS
|
|
// #include "ZH_ST7789-LPS-SPS.h"
|
|
|
|
// Setup file configured for my ST7735 160x80 - Ali - more pins than Pimoroni
|
|
#include "ZH_ST7735-Ali-160x80.h"
|
|
|
|
// Setup file configured for my ST7735 160x80 - Pimoroni - les pins than Ali
|
|
// #include "ZH_ST7735-Pimoroni-160x80.h"
|
|
|
|
// Setup file configured for my ST7789 240x240 - used in new sensor device
|
|
// #include <../0-ZH_library/TFT_eSPI_display_setups/ZH_ST7789-NEW-SENSORS.h>
|
|
|
|
// Setup file configured for my ILI9341 320x240 - both touch and NO touch - the same pins and settings - used in 110 bedroom
|
|
// #include <../0-ZH_library/TFT_eSPI_display_setups/ZH_ILI9341.h>
|
|
|
|
// Setup file configured for my ILI9341 320x240 - for hot plate
|
|
// #include <../0-ZH_library/TFT_eSPI_display_setups/ZH_ILI9341-hot-plate.h>
|
|
|
|
// Setup file configured for my ILI9486 480x320 based on ST7779 driver - it works with S2
|
|
// #include <../0-ZH_library/TFT_eSPI_display_setups/ILI9486-ST779based.h>
|
|
|
|
// Setup file configured for my ILI9341 320x240 - both touch and NO touch - the same pins and settings - used for new red board
|
|
// #include <../0-ZH_library/TFT_eSPI_display_setups/ZH_ILI9341-new-sensors.h>
|
|
|
|
#endif // USER_SETUP_LOADED
|
|
|
|
/////////////////////////////////////////////////////////////////////////////////////
|
|
// //
|
|
// DON'T TINKER WITH ANY OF THE FOLLOWING LINES, THESE ADD THE TFT DRIVERS //
|
|
// AND ESP8266 PIN DEFINITONS, THEY ARE HERE FOR BODMER'S CONVENIENCE! //
|
|
// //
|
|
/////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
// Identical looking TFT displays may have a different colour ordering in the 16 bit colour
|
|
#define TFT_BGR 0 // Colour order Blue-Green-Red
|
|
#define TFT_RGB 1 // Colour order Red-Green-Blue
|
|
|
|
// Legacy setup support, RPI_DISPLAY_TYPE replaces RPI_DRIVER
|
|
#if defined (RPI_DRIVER)
|
|
#if !defined (RPI_DISPLAY_TYPE)
|
|
#define RPI_DISPLAY_TYPE
|
|
#endif
|
|
#endif
|
|
|
|
// Legacy setup support, RPI_ILI9486_DRIVER form is deprecated
|
|
// Instead define RPI_DISPLAY_TYPE and also define driver (e.g. ILI9486_DRIVER)
|
|
#if defined (RPI_ILI9486_DRIVER)
|
|
#if !defined (ILI9486_DRIVER)
|
|
#define ILI9486_DRIVER
|
|
#endif
|
|
#if !defined (RPI_DISPLAY_TYPE)
|
|
#define RPI_DISPLAY_TYPE
|
|
#endif
|
|
#endif
|
|
|
|
// Invoke 18 bit colour for selected displays
|
|
#if !defined (RPI_DISPLAY_TYPE) && !defined (TFT_PARALLEL_8_BIT) && !defined (TFT_PARALLEL_16_BIT) && !defined (ESP32_PARALLEL)
|
|
#if defined (ILI9481_DRIVER) || defined (ILI9486_DRIVER) || defined (ILI9488_DRIVER)
|
|
#define SPI_18BIT_DRIVER
|
|
#endif
|
|
#endif
|
|
|
|
// Load the right driver definition - do not tinker here !
|
|
#if defined (ILI9341_DRIVER) || defined(ILI9341_2_DRIVER) || defined (ILI9342_DRIVER)
|
|
#include <TFT_Drivers/ILI9341_Defines.h>
|
|
#define TFT_DRIVER 0x9341
|
|
#elif defined (ST7735_DRIVER)
|
|
#include <TFT_Drivers/ST7735_Defines.h>
|
|
#define TFT_DRIVER 0x7735
|
|
#elif defined (ILI9163_DRIVER)
|
|
#include <TFT_Drivers/ILI9163_Defines.h>
|
|
#define TFT_DRIVER 0x9163
|
|
#elif defined (S6D02A1_DRIVER)
|
|
#include <TFT_Drivers/S6D02A1_Defines.h>
|
|
#define TFT_DRIVER 0x6D02
|
|
#elif defined (ST7796_DRIVER)
|
|
#include "TFT_Drivers/ST7796_Defines.h"
|
|
#define TFT_DRIVER 0x7796
|
|
#elif defined (ILI9486_DRIVER)
|
|
#include <TFT_Drivers/ILI9486_Defines.h>
|
|
#define TFT_DRIVER 0x9486
|
|
#elif defined (ILI9481_DRIVER)
|
|
#include <TFT_Drivers/ILI9481_Defines.h>
|
|
#define TFT_DRIVER 0x9481
|
|
#elif defined (ILI9488_DRIVER)
|
|
#include <TFT_Drivers/ILI9488_Defines.h>
|
|
#define TFT_DRIVER 0x9488
|
|
#elif defined (HX8357D_DRIVER)
|
|
#include "TFT_Drivers/HX8357D_Defines.h"
|
|
#define TFT_DRIVER 0x8357
|
|
#elif defined (EPD_DRIVER)
|
|
#include "TFT_Drivers/EPD_Defines.h"
|
|
#define TFT_DRIVER 0xE9D
|
|
#elif defined (ST7789_DRIVER)
|
|
#include "TFT_Drivers/ST7789_Defines.h"
|
|
#define TFT_DRIVER 0x7789
|
|
#elif defined (R61581_DRIVER)
|
|
#include "TFT_Drivers/R61581_Defines.h"
|
|
#define TFT_DRIVER 0x6158
|
|
#elif defined (ST7789_2_DRIVER)
|
|
#include "TFT_Drivers/ST7789_2_Defines.h"
|
|
#define TFT_DRIVER 0x778B
|
|
#elif defined (RM68140_DRIVER)
|
|
#include "TFT_Drivers/RM68140_Defines.h"
|
|
#define TFT_DRIVER 0x6814
|
|
#elif defined (SSD1351_DRIVER)
|
|
#include "TFT_Drivers/SSD1351_Defines.h"
|
|
#define TFT_DRIVER 0x1351
|
|
#elif defined (SSD1963_480_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (SSD1963_800_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (SSD1963_800ALT_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (SSD1963_800BD_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (GC9A01_DRIVER)
|
|
#include "TFT_Drivers/GC9A01_Defines.h"
|
|
#define TFT_DRIVER 0x9A01
|
|
#elif defined (ILI9225_DRIVER)
|
|
#include "TFT_Drivers/ILI9225_Defines.h"
|
|
#define TFT_DRIVER 0x9225
|
|
#elif defined (RM68120_DRIVER)
|
|
#include "TFT_Drivers/RM68120_Defines.h"
|
|
#define TFT_DRIVER 0x6812
|
|
#elif defined (HX8357B_DRIVER)
|
|
#include "TFT_Drivers/HX8357B_Defines.h"
|
|
#define TFT_DRIVER 0x835B
|
|
#elif defined (HX8357C_DRIVER)
|
|
#include "TFT_Drivers/HX8357C_Defines.h"
|
|
#define TFT_DRIVER 0x835C
|
|
|
|
// <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE
|
|
// XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.cpp
|
|
#elif defined (XYZZY_DRIVER)
|
|
#include "TFT_Drivers/XYZZY_Defines.h"
|
|
#define TFT_DRIVER 0x0000
|
|
#else
|
|
#define TFT_DRIVER 0x0000
|
|
#endif
|
|
|
|
// These are the pins for ESP8266 boards
|
|
// Name GPIO NodeMCU Function
|
|
#define PIN_D0 16 // GPIO16 WAKE
|
|
#define PIN_D1 5 // GPIO5 User purpose
|
|
#define PIN_D2 4 // GPIO4 User purpose
|
|
#define PIN_D3 0 // GPIO0 Low on boot means enter FLASH mode
|
|
#define PIN_D4 2 // GPIO2 TXD1 (must be high on boot to go to UART0 FLASH mode)
|
|
#define PIN_D5 14 // GPIO14 HSCLK
|
|
#define PIN_D6 12 // GPIO12 HMISO
|
|
#define PIN_D7 13 // GPIO13 HMOSI RXD2
|
|
#define PIN_D8 15 // GPIO15 HCS TXD0 (must be low on boot to enter UART0 FLASH mode)
|
|
#define PIN_D9 3 // RXD0
|
|
#define PIN_D10 1 // TXD0
|
|
|
|
#define PIN_MOSI 8 // SD1 FLASH and overlap mode
|
|
#define PIN_MISO 7 // SD0
|
|
#define PIN_SCLK 6 // CLK
|
|
#define PIN_HWCS 0 // D3
|
|
|
|
#define PIN_D11 9 // SD2
|
|
#define PIN_D12 10 // SD4
|