# LED GPIO = 1
# Button GPIO = 9 - same as boot

substitutions:
  hostname:               "moka1-led"
  device_name:            $hostname
  wifi_update_interval:   15s
  ch1_pwm_pin:            "GPIO01"
  debounce:               "50ms"
  Button1:                GPIO09  

esphome:
  name: $hostname
  friendly_name: $hostname

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

api:

ota:
  - platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect:           true
  power_save_mode:        none  

  ap:
    ssid: $hostname
    password: "12345678"

captive_portal:
    
logger: 
  level:          INFO

web_server:
  port: 80

time:
  platform:         homeassistant
  id:               homeassistant_time

# default sensors
text_sensor:
  - platform:     wifi_info
    ip_address:
      name:       "${hostname} IP"
      icon:        mdi:ip-network

    ssid:
      name: "${hostname} SSID"

    bssid:
      name: "${hostname} BSSID"

    mac_address:
      name:       "${hostname} MAC"
      icon:       mdi:ip-network

  - platform:     template
    name:         "${hostname} Uptime Human"
    id:           uptime_human
    icon:         mdi:timer-sand

  - platform:     version
    name:         ${hostname} ESPHome Version
    icon:         mdi:numeric

sensor:
  - platform:     wifi_signal
    name:         "${hostname}  RSSI"
    update_interval: $wifi_update_interval
    icon:         mdi:signal

  - platform:     uptime
    name:         "${hostname} Uptime"
    id:           uptime_sensor
    icon:         mdi:timer-sand
    update_interval: $wifi_update_interval
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();

# default controls
switch:
  - platform: restart
    id:       restart_switch
    name:     "${hostname} Restart"
    icon:     mdi:restart

button:
  - platform: restart
    id:       restart_button
    name:     "${hostname} Restart"
    icon:     mdi:restart

# device specific
output:
  - platform: ledc
    pin: $ch1_pwm_pin
    id: ch1_pwm
    frequency: "25000Hz"
    min_power: 0.0
    max_power: 1.0

light:
  - platform: monochromatic
    name: "$hostname light"
    id: led1
    output: ch1_pwm
    default_transition_length: "1.0s"
    restore_mode: RESTORE_DEFAULT_ON

binary_sensor:
  - platform:     status
    name:         "${hostname} Status"
    icon:         mdi:connection
  # Button on mini switch
  - platform: gpio
    pin:
      number: $Button1
      mode: INPUT_PULLUP
      inverted: true
    name: "${hostname} Button"
    disabled_by_default: false
    internal: true
    on_multi_click:
    # 3 clicks: 50%
      - timing:
          - ON for at most 0.5s
          - OFF for at most 0.5s
          - ON for at most 0.5s
          - OFF for at most 0.5s
        then:
          - light.turn_on:
              id: led1
              brightness: 50%    
    # short click: toggle 
      - timing:
          - ON for at most 1s
          - OFF for at least 0.2s
        then:
          - light.toggle: led1
    # long click: 100%
      - timing:
          - ON for at least 1s
          - OFF for at least 0.2s
        then:
          - light.turn_on:
              id: led1
              brightness: 100%