113 lines
3.8 KiB
C++
113 lines
3.8 KiB
C++
/**
|
|
* Secure Write Example code for InfluxDBClient library for Arduino
|
|
* Enter WiFi and InfluxDB parameters below
|
|
*
|
|
* Demonstrates connection to any InfluxDB instance accesible via:
|
|
* - unsecured http://...
|
|
* - secure https://... (appropriate certificate is required)
|
|
* - InfluxDB 2 Cloud at https://cloud2.influxdata.com/ (certificate is preconfigured)
|
|
* Measures signal level of the actually connected WiFi network
|
|
* This example demonstrates time handling, secure connection and measurement writing into InfluxDB
|
|
* Data can be immediately seen in a InfluxDB 2 Cloud UI - measurement wifi_status
|
|
**/
|
|
|
|
#if defined(ESP32)
|
|
#include <WiFiMulti.h>
|
|
WiFiMulti wifiMulti;
|
|
#define DEVICE "ESP32"
|
|
#elif defined(ESP8266)
|
|
#include <ESP8266WiFiMulti.h>
|
|
ESP8266WiFiMulti wifiMulti;
|
|
#define DEVICE "ESP8266"
|
|
#endif
|
|
|
|
#include <InfluxDbClient.h>
|
|
#include <InfluxDbCloud.h>
|
|
|
|
// WiFi AP SSID
|
|
#define WIFI_SSID "SSID"
|
|
// WiFi password
|
|
#define WIFI_PASSWORD "PASSWORD"
|
|
// InfluxDB v2 server url, e.g. https://eu-central-1-1.aws.cloud2.influxdata.com (Use: InfluxDB UI -> Load Data -> Client Libraries)
|
|
#define INFLUXDB_URL "server-url"
|
|
// InfluxDB v2 server or cloud API authentication token (Use: InfluxDB UI -> Load Data -> Tokens -> <select token>)
|
|
#define INFLUXDB_TOKEN "server token"
|
|
// InfluxDB v2 organization id (Use: InfluxDB UI -> Settings -> Profile -> <name under tile> )
|
|
#define INFLUXDB_ORG "org id"
|
|
// InfluxDB v2 bucket name (Use: InfluxDB UI -> Load Data -> Buckets)
|
|
#define INFLUXDB_BUCKET "bucket name"
|
|
|
|
// Set timezone string according to https://www.gnu.org/software/libc/manual/html_node/TZ-Variable.html
|
|
// Examples:
|
|
// Pacific Time: "PST8PDT"
|
|
// Eastern: "EST5EDT"
|
|
// Japanesse: "JST-9"
|
|
// Central Europe: "CET-1CEST,M3.5.0,M10.5.0/3"
|
|
#define TZ_INFO "CET-1CEST,M3.5.0,M10.5.0/3"
|
|
|
|
// InfluxDB client instance with preconfigured InfluxCloud certificate
|
|
InfluxDBClient client(INFLUXDB_URL, INFLUXDB_ORG, INFLUXDB_BUCKET, INFLUXDB_TOKEN, InfluxDbCloud2CACert);
|
|
// InfluxDB client instance without preconfigured InfluxCloud certificate for insecure connection
|
|
//InfluxDBClient client(INFLUXDB_URL, INFLUXDB_ORG, INFLUXDB_BUCKET, INFLUXDB_TOKEN);
|
|
|
|
// Data point
|
|
Point sensor("wifi_status");
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
|
|
// Setup wifi
|
|
WiFi.mode(WIFI_STA);
|
|
wifiMulti.addAP(WIFI_SSID, WIFI_PASSWORD);
|
|
|
|
Serial.print("Connecting to wifi");
|
|
while (wifiMulti.run() != WL_CONNECTED) {
|
|
Serial.print(".");
|
|
delay(500);
|
|
}
|
|
Serial.println();
|
|
|
|
// Add tags
|
|
sensor.addTag("device", DEVICE);
|
|
sensor.addTag("SSID", WiFi.SSID());
|
|
|
|
// Alternatively, set insecure connection to skip server certificate validation
|
|
//client.setInsecure();
|
|
|
|
// Accurate time is necessary for certificate validation and writing in batches
|
|
// For the fastest time sync find NTP servers in your area: https://www.pool.ntp.org/zone/
|
|
// Syncing progress and the time will be printed to Serial.
|
|
timeSync(TZ_INFO, "pool.ntp.org", "time.nis.gov");
|
|
|
|
// Check server connection
|
|
if (client.validateConnection()) {
|
|
Serial.print("Connected to InfluxDB: ");
|
|
Serial.println(client.getServerUrl());
|
|
} else {
|
|
Serial.print("InfluxDB connection failed: ");
|
|
Serial.println(client.getLastErrorMessage());
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
// Store measured value into point
|
|
sensor.clearFields();
|
|
// Report RSSI of currently connected network
|
|
sensor.addField("rssi", WiFi.RSSI());
|
|
// Print what are we exactly writing
|
|
Serial.print("Writing: ");
|
|
Serial.println(client.pointToLineProtocol(sensor));
|
|
// If no Wifi signal, try to reconnect it
|
|
if (wifiMulti.run() != WL_CONNECTED) {
|
|
Serial.println("Wifi connection lost");
|
|
}
|
|
// Write point
|
|
if (!client.writePoint(sensor)) {
|
|
Serial.print("InfluxDB write failed: ");
|
|
Serial.println(client.getLastErrorMessage());
|
|
}
|
|
|
|
//Wait 10s
|
|
Serial.println("Wait 10s");
|
|
delay(10000);
|
|
} |